x
Search Inventory    Search Products & Site

Agriculture 2100 Minimum Till Ripper

Double tap to zoom

 

Features

19-mm (0.75-in.) straight shear-bolt standard minimizes soil and residue disturbance at the surface

The 19-mm (0.75-in.) straight shear-bolt standard design moves through the soil minimizing soil and residue disturbance at the soil surface.

  • Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
  • Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) min-till ripper points

The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.

Variety of working widths available

The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m
(7 ft, 6 in. to 22 ft, 6 in.).

Working width Number Spacing
2.29 m (7 ft, 6 in.) 3 762 mm (30 in.)
2.74 m (9 ft) 3 914 mm (36 in.)
3.05 m (10 ft) 4 762 mm (30 in.)
3.81 m (12 ft, 6 in.) 5 762 mm (30 in.)
4.57 m (15 ft) 5 914 mm (36 in.)
5.33 m (17 ft, 6 in.) 7 762 mm (30 in.)
6.86 m (22 ft, 6 in.) 9 762 mm (30 in.)
6.86 m (22 ft, 6 in.) fold 9 762 mm (30 in.)

Heavy-duty frame handles tough operating conditions

The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.

 

Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.

 

Welded together into one assembly, the frame is designed to handle the most severe operating conditions.

 

The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.

2100 Drawn Hitch option available for seven- and nine-standard models

A drawn hitch option is available for those who want to use large row-crop tractors or 4WD tractors without a 3-point hitch.

The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.

The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.

The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track in order to leave as level a profile as possible.

There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762-mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.

The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.

A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.

The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.

NOTE: The drawn hitch attachment is only compatible with serial number 1300 or newer machines.

Closing wheel available to minimize surface disturbance

  • Minimize surface disturbance created by the standard
  • Provide more adjustments to match farming practices and varying soil conditions than competitive models
  • 114 kg (250 lb) of down pressure
  • Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
  • Mounted with an L-bracket, allowing better soil and residue flow

 

Spring-cushion coulters enable more level soil profile

Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile:

  • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade is in base equipment and allows the least amount of soil and residue disturbance.
  • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade is optional equipment for use when increased soil movement is desired.

 

Stabilizer wheels ensure straight travel and provide support

Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.

 

The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.

Additional stabilizer wheels and tires can be added if field conditions warrant more support.

Specifications

Key Specs

Working width 2.3 m 7.5 ft
2.7 m 9 ft
3.05 m 10 ft
3.8 m 12.5 ft
4.6 m 15 ft
5.3 m 17.5 ft
6.8 m 22.5 ft
Transport width 3.05 m 10 ft
4.1 m 13.5 ft
5 m 16.5 ft
6.7 m 22 ft
4.7 m 15.5 ft
Operating depth Maximum
40.6 cm
16 in.
Miles per hour 6.4-8 km/h
4-5 mph
Horsepower per standard 22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp
Spacings 76.2 cm
30 in.
91.4 cm
36 in.

Tool configuration

Type In-line ripper
Option 1 Standard: 3, spacing: 76.2 cm
30 in.
Option 2 Standard: 3, spacing: 91.4 cm
36 in.
Option 3 Standard: 4, spacing: 76.2 cm
30 in.
Option 4 Standard: 5, spacing: 76.2 cm
30 in.
Option 5 Standard: 5, spacing: 91.4 cm
36 in.
Option 6 Standard: 7, spacing: 76.2 cm
30 in.
Option 7 Standard: 9, spacing: 76.2 cm
30 in.
Rigid
Option 8 Standard: 9, spacing: 76.2 cm
30 in.
Folding

Working width

Option 1 2.3 m
7.5 ft
Option 2 2.7 m
9 ft
Option 3 3.05 m
10 ft
Option 4 3.8 m
12.5 ft
Option 5 4.6 m
15 ft
Option 6 5.3 m
17.5 ft
Option 7 6.8 m
22.5 ft
Option 8 6.8 m
22.5 ft

Transport width

Option 1 3.05 m
10 ft
Option 2 3.05 m
10 ft
Option 3 3.05 m
10 ft
Option 4 4.1 m
13.5 ft
Option 5 4.1 m
13.5 ft
Option 6 5 m
16.5 ft
Option 7 6.7 m
22 ft
Option 8 4.7 m
15.5 ft

Operating depth

Maximum 40.6 cm
16 in.

Frame

Size 102x152x0.9.5 mm
4x6x0.375 in.
9 standard: 152x152x9.5 mm
6x6x0.35 in.
Maximum underframe clearance 89 cm
35 in.

Operating speed

Miles per hour 6.4-8 km/h
4-5 mph

Horsepower required

Horsepower per standard 22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp

Depth control

Option 1 3-point hitch for integral
Option 2 Single point for pull-type
Option 3  

Hydraulic requirements

Option 1 Pull type: 1 SCV (lift) at 17,237 kPa
2500 psi
for optimum raise times
Option 2 Low transport: 1 SCV (fold) at 17,237 kPa
2,500 psi
for optimum raise times

Hitch

Options Integral, or 7- or 9-standard pull type
Three-point hitch requirements Category 2, Category 3 and 3N (with Quik-Coupler)
Pull-type description Level Lift

Standard options

Spacings 76.2 cm
30 in.
91.4 cm
36 in.
Option 1 Trip force
Shear bolt: 3,265.9 kg
7,200 lb
Standard type
19 mm
0.75 in.
or 31.75 mm
1.25 in.
Straight with wear shin
Shear-bolt
Option 2 Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip

Ground-engaging components

Options Standard: 19 mm (0.75 in.), min-till point: 178 mm (7 in.), low-disturbance: 254 mm (10 in.), ultra-low-disturbance: 63 mm (2.5 in.)
Standard: 31.75 mm (1.25 in.), Regular: 57 mm (2.25 in.), Capped: 57 mm (2.25 in.), Double-capped: 57 mm (2.25 in.)
LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)

Coulters

Description  
Type Spring cushion coulters
Pounds of force Normal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in.
Blades Straight or rippled: 559x4.5 mm
22x0.177 in.

Closing wheel attachment

Description Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels.
Down force 113.4 kg
250 lb
Size 10.2x40.6 cm
4x16 in.
Spacing 19.05 to 35.6 cm
7.5 to 14 in.
Angle adjustments 0 to 15 degree (angle)

Stabilizer/gauge wheels

Type Stabilizer wheels
Wheels 52.1x20.3 cm
20.5x8 in.
Tires 10 PR

Pull-type wheels

Description 12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Additional feature Replaceable wear shin
Option 1 Set back brackets