x
Search Inventory    Search Products & Site

Agriculture 2025R

Double tap to zoom

 

Features

  • Powerful and fuel-efficient Tier IV Yanmar engine
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ 7-Iron Drive-over mower decks up to 60 inches
  • Standard cruise control, 12-V outlet and premium seating

Specifications

Key Specs

Engine power (gross) 17.8 kW
23.9 hp
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Steering hydraulics 13.25 L/min
3.5 gpm
Implement hydraulics 13.25 L/min
3.5 gpm
Hitch type Limited Category 1
Lift capacity, 24-in. behind link arms 400 kg
882 lb
Standard transmission; forward/reverse Hydrostatic - 2 range
Cruise control Standard
Approximate shipping weight (open-station; cab) 813.5 kg
1793.4 lb
Wheelbase 1600 mm
63 in.

Engine

Family GYDXL1.27NS1
HYDXL1.27NS1
Manufacturer Yanmar
Engine model 3TNV80F-NCJT
Engine power (gross) 17.8 kW
23.9 hp
SAE J1995 rated power
Power take-off (PTO) power 13.4 kW
18 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.267 L
3 / 77 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80 x 84 mm
3.2 x 3.3 in.
Compression ratio 23:01
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 53 Nm
39.09 lb-ft
Fuel tank capacity 20.4 L
5.39 gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Fuel system

Type Indirect injection
Fuel consumption
5.8 L/hr
1.5 U.S. gal./hr

Transmission

Standard transmission; forward/reverse Hydrostatic - 2 range
Left-hand reverser No
Final drive Spur Gear
Brakes Wet disc
Steering Power steering
Axle capacity Front
612 kg
1349 lb
Rear
1100 kg
2425 lb
Creeper No
Cruise control Standard
Differential lock Yes

Hydraulics

Type Open center
Pump rated output Steering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7 gpm
Pump type Gear
Maximum operating pressure 148.2 bar
2150 psi
Draft control sensing Position control
Remote control valves available Two

3-point hitch

Type Limited Category 1
Lift capacity, 24-in. behind link arms 400 kg
882 lb

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2100 rpm
Control Independent
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt

Final drive

Type Spur Gear
Differential lock Yes

Operator station

Rollover protective structure Type
Foldable
OSHA, SAE, ASAE
Platform - flat/straddle Three-piece semi flat
Gear shift location - console/floor Left-hand side

Dimensions

Wheelbase 1600 mm
63 in.
Front axle clearance 316 mm
12.5 in.
Turning radius without brakes 2.65 m
8.7 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) 813.5 kg
1793.4 lb

Tires

Front R3 Turf - 23x8.50-12
R4 Industrial - 23x8.50-12
R3 Radial - 220/55-R12
Rear R3 Turf - 31x13.5-15
R4 Industrial - 12-16.5
R3 Radial - 280/70-R16
Front tread range 95.3 cm
37.5 in.

Miscellaneous

Toolbox Yes
Tilt steering wheel Yes
12-V Outlet Yes