Search Inventory    Search Products & Site

Land Pride BB3596

Double tap to zoom



Features Benefits
3/8" Heavy side panels Built heavy to handle the tough jobs.
Square tubing shank support Many competitors use angle iron. Box tubing is stronger.
Clevis-type lower 3-point hitch Much stronger than pin type hitch.
4 Position heat treated spring steel shanks Offers flexibility for deep to shallow settings and heat-treated for longevity.
78", 84", & 96" Optional widths Available in different widths to meet customer needs.
45 to 110 HP range Fits a wide variety of tractors.
Formed moldboard Formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions.
23" Moldboard height High material capacity.
Moldboard Heavy moldboard with precise roll holds its shape under heavy loads.
Heat-treated dimpled-on tips Easy to replace tips that are heat-treated for toughness.
Heat-treated, reversible, and replaceable cutting blades Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades.
Rear backfill blade Rear backfill blade allows for backfilling trenches or foundations.
Warranty One year parts & labor.
Category I & II 3-point hitch with Quick Hitch capability Fits a wide variety of tractors.Quick Hitch capability allows for easy hook-up.
Heavy 4" x 4" x 3/8" shank beam with 1/2" x 1/2" reinforced shank holes Reinforcement behind shanks where maximum pressure is applied adds additional strength to the shank tube.
Strong box reinforcement Two welded channel braces extending from shank beam to rear of box plus four welded gussets between the side panels, moldboard, and shank beam provide exceptional strength for keeping the Box Scraper square under heavy loads.


Model BB3596
Working width 96"
Capacity 37 cu. ft.
Weight 931 lbs.
Number of shanks 8
Shank material 3/4" x 2 9/16" x 18" heat treated spring steel
Vertical shank positions 4- positions (2" above, even, 2" below & 4" below scraper end plates)
Shank tip construction Replaceable heat treated dimpled-on tips
Shank beam 4" x 4" x 3/8" Square Tubing with 1/2" x 1/2" reinforced shank opening
Lift mechanism Manual with bent pin and hairpin cotter at each shank.
Moldboard Formed moldboard - 23” High
Side Panels 3/8" thick x 23" high x 36" deep
Depth of bucket 22"
Bucket reinforcement Two braces extending from shank beam to rear of bucket, two horizontal gussets between the side panels and moldboard, and two vertical gussets between shank beam and side panels.
Cutting blades 2 ea. 1/2" x 6" high carbon, heat treated cutting edges; reversible and replaceable.
Backfill blade is standard
Maximum HP rating 110 HP
A-frame hitch construction 1/2" HR A-frame plates
3-Point hitch type Cat. I & Cat.II Double strap lower clevises
Fits Land Pride Quick Hitch