Search Inventory    Search Products & Site

Land Pride RBT3596

Double tap to zoom



84" & 96" Working widths Choice of two sizes to pick from. Both sizes handle large capacities.
35 to 80 HP range for 2-Wheel Drive
35 to 65 HP range for 4- Wheel Drive
Fits a wide variety of tractors.
Cat. 1 or 2 Fits wide variety of tractors.
Fits Land Pride Quick-Hitch Quick and easy attaching without leaving tractor seat.
3-Way Blade Tilt, angle and offset features available hydraulically or manually.
Blade angles left and right up to 40 degrees manually and up to 50 degrees hydraulically in either direction (9 positions manually: Center, 4 clockwise and 4 counterclockwise in 10 degree increments) (Hydraulically: Any degree up to 50 degrees) Allows the operator to set the blade at the angle of his choice up to 40 degrees to complete the job with satisfactory results.
Blade offsets left and right up to 30” (9 positions manually: Center, 4 positions left and 4 positions right) (Hydraulically: Any position up to 30”) Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
Blade tilts up and down up to 20 degrees Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
Fully welded main frame (Tubular construction) Fully welded adds overall strength and rigidity to blade frame.
Heavy-duty pivot assembly with 3” solid steel kingpin 3/4” Plate steel turntable and 3” kingpin for handling the high amount of torque that can be transferred to this area.
Formed 17 inch Moldboard Precisely formed moldboard rolls dirt and debris with ease.
5/16” Moldboard thickness with box reinforcement Thick material with fully welded box reinforcement creates a strong moldboard.
Reversible cutting edge Get twice the wear from the cutting edge by flipping it over.
Retractable parking stand Able to store the unit with the frame off the ground, also aids in attaching to tractor.
Skid shoes Skid shoes help protect from hitting low obstructions by keeping the moldboard off the ground.
End plates End plates hold material in and allows it to be moved.
Cushion valve Helps protect the moldboard and cylinders in the event an obstruction is hit by allowing hydraulic fluid to bypass the cushion valve and flow back towards the tractor.


Model RBT3596
Blade Width 96"
Approximate Weight (lbs.)
with manual links
745 lbs.
Maximum Tractor Horsepower Maximum Tractor Horsepower
Maximum G.V.W. (lbs.) 9500 lbs.
Hitch Type Cat. 1 & 2
Fits Land Pride Quick-Hitch
Blade Angle
Manual Linkage:
Hydraulic Cylinder:
With blade facing forward or reversed
Up to 40o in 10o increments clockwise and counterclockwise
Up to 50 degrees clockwise and counterclockwise
Angle Cylinder 3 1/2" X 14" X 1 1/4"
Blade Offset Manual Linkage
Hydraulic Cylinder
Up to 30 inches left and right in 9 positions (Center, 4 left and 4 right)
Up to 30 inches left and right
Offset Cylinder 3 1/2" X 14" X 1 1/4"
Blade Tilt Manual Ratchet Jack
Hydraulic Cylinder
Maximum 20o up and 20o down with blade facing forward or reversed
Maximum 20o up and 20o down with blade facing forward or reversed
Tilt Cylinder 2" X 6" X 1 1/4"
Moldboard King Pin 3" diameter
Moldboard Height 17" tall
Moldboard Thickness 5/16" reinforced, 3/16" tapered reinforcement channel
Cutting Edge 1/2" x 6" Heat treated, Replaceable & Reversible (Double bevel)
Main Frame Construction Fully Welded Tubular Construction
Parking Stand Retractable
Accessories Manual or Hydraulic Single Gauge Wheel
Skid Shoes, End Plates, Hydraulic Selector Valve and Cushion Valve