|10 ft & 12 ft working widths
|Choice of two sizes to pick from. Both sizes handle large capacities.
|High hp range 2-Wheel drive
|225 Hp with 10 ft blade & 175 hp with 12 ft blade
200 Hp with 10 ft blade & 160 hp with 12 ft blade
|Cat. II and Cat III 3-Point Hitch
|Can go from Cat. II to Cat. III 3-point tractor. Enables a wider variety of tractors to be used.
|Quick hitch compatible
|Compatible with Land Pride QH20 Cat. II Quick hitch for easy attachment and removal.
|Blade angles left and right up to 45 degrees hydraulically
|Allows the operator to set the blade at the angle of his choice to complete the job with satisfactory results.
|Blade offsets left and right up to 55” hydraulically
|Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
|Blade tilts up and down up to 15 degrees hydraulically
|Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
|Mainframe is fully welded and reinforced
|Overall Mainframe strength is enhanced due to being fully welded.
|Heavy-duty pivot assembly with 4 1/2” Diameter solid steel moldboard kingpin
|1" Plate steel turntable and 4 1/2" King pin for handling high torque in this area up to
225 hp 2-wheel or 200 hp 4-wheel drive tractors with 10 ft moldboard and
175 hp 2-wheel or 160 hp 4-wheel drive tractors with 12 ft moldboard.
|Formed 19” high moldboard
|Can move a great deal of material in a short time.
|1/2” Formed Moldboard with 3/8” formed channel reinforcement
|Makes it one of the strongest moldboards in its class for handling heavy loads.
|Retractable parking stand
|Enables one person hook-up and keeps the mainframe off of the ground.
|Front pivot shaft has two grease points
|Helps front pivot shaft to move easily.
|Heavy-duty blade pivot assembly
|1” Plate steel turntable and 4 1/2” kingpin handle tremendous torque delivered by up to 225 HP tractors.
|Skid shoes protect moldboard from hitting low lying obstructions such as manhole covers.
|End plates allow the blade to hold material in to drag from one spot to another.
|Dual gauge wheels
|Gauge wheels position the height of the blade to aid in grading.