Land Pride RTA2562
Features
FEATURES | BENEFITS |
American made | Many tillers are imported. American made means better parts availability. |
Tractor HP range | (RTA25 = 25 - 55 HP) and (RTA35 = 35 - 75 HP) |
Gearbox warranty | 3 Years on housing, gears, shafts, seals, bearings. Shows our confidence in the product. |
Working widths | (RTA25 = 62" & 70") And (RTA35 = 76") To meet specific customer needs |
8" Digging depth | For extra deep soil penetration and cultivation. |
Stamped upper hitch plate | Stamped plate adds additional strength to hitch. |
Hitch bolted to inside of support | Force is applied downward on top hitch, by bolting hitch to inside of support. Keeps hitch from 'spreading' outward. |
Clevis Style Lower Hitch | Allows easier hook-up of lower 3-point arms. |
Hitch Offset capability | Offset 5" by moving lower hitch points to cover right tire track. |
Fits Land Pride Quick-Hitch | Allows for quick and easy one person hook-up. Offset can not be used with Quick-Hitch. |
Adjustable Parking stand | Allows for easy hook-up and storage. |
Adjustable skid shoes | Control depth with various settings. |
Wear shield or left skid shoe | Shield protects lower portion of chain cover from wearing due to dragging in the soil. |
Formed rear deflector with springs | Forming gives deflector additional strength. Springs allow deflector to ''bounce'' when obstructions are hit. |
Rear gate down pressure springs (optional) | Forces the rear gate down to level even better. Easy-to-adjust chain tightener Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain. |
Four or six tines per flange | Six tines go through the ground better than four. |
"C" Tines | C Tines take less horsepower to move through the ground. |
Rotor swing diameter | (RTA25 = 17") And (RTA35 = 19") For deep tilling action and turning the soil over faster. |
Double lip seal on rotor bearings | Double lip seal helps keep the dirt out and the grease in. |
Cat. 3 driveline with slip-clutch protection | Heavy driveline for rough conditions. Slip-clutch protects other drive train components and saves having to replace shear bolts. |
#100 Drive chain enclosed in oil bath | Heavy-duty drive chain reduces stretching, oil keeps constant lubrication and holds wear to a minimum. |
Stamped chain cover | Stamped forming adds additional strength. |
Specifications
Model | RTA2562-06 |
Recommended Tractor PTO HP | 25-75 Horsepower |
Weight | 649 lbs. |
Tilling Width | 62" |
Overall Width | 67 5/8" |
3-Point Hitch Type | Category I, Adjustable Lower Hitch Clevis with Plated Pins |
Quick Hitch Compatible Cat. I | Yes |
Cat. II | No |
Offset Capabilities | Yes, up to 5" maximum. May require offsetting the tractor’s lower 3-Point lift arms to achieve full 5" offset. (Cannot offset with Quick Hitch) |
Number of Flanges | 8 |
Number of Tines per Flange | 6 |
Tine Construction | High Carbon heat treated “C” shaped blades |
Skid Shoes | Adjustable |
Storage Stands | Adjustable |
Rear Deflector | Spring Loaded, adjustable, rear deflector |
Driveline | ASAE Category III Heavy Duty Slip-Clutch |
Gearbox | 45 HP at 540 rpm 1.92:1 Ratio |
Gearbox Construction | Cast Iron Housing, Straight Bevel Gears |
Gearbox Lubrication & Oil Capacity | SAE 80-90W EP oil |
Gearbox Oil Capacity | 2 Pints |
Drive Chain | #100 Roller chain Fully enclosed in oil bath with drain plug, fill plug and skid protection |
Chain Case Oil Type | Shell Gadus S2 V2200 00 flowable grease or equivalent Land Pride Part #821-045C (32 oz. bottle) |
Sprockets | 2" Cold rolled steel |
Rotor Swing Diameter | 17" |
Rotor Shaft Speed | 220 rpm at 540 rpm power take-off speed |