Loftness 72M
Double tap to zoom
Tractor Mounted/PTO 72M
Overview:
Loftness understands the demands that endless hours of use can put on mowing equipment. That's why we designed the tractor-mounted, PTO-driven flail mower with hardened materials and heavy duty components. The versatility of the PTO flail mower allows the cutting of grass or weeds, and up to 3/4 inch diameter brush with the same knives.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
- 10 gauge (3.4 mm) steel body
- Curved hood for improved suction
- 1 3/4 inch (4.5 cm) rotor bearings
- Structural steel frame
- Bearing deflector guard
- Steel deflector shields
- 1/4 inch (6.4 mm) steel end plate
- Adjustable skid shoes
- Rear steel deflector
- 0 to 4.5 inch (0-11.4 cm) cutting height
- Offsetable hitch - 14 inches to the right
- Line-shaft support bearing
- Full-width adjustable gauge roller
- 70 HP (52 kw) gearbox
- 1 1/2 inch (3.8 cm) roller bearings
- 540 RPM PTO
- Roller scraper
- Spring-loaded belt tightener
- Taper-lock sheaves
- 3-groove banded belt
Advantages
- Destroys and mulches grass or weeds and cuts brush up to 3/4 inch (2 cm) in diameter
- Mower leaves an even mat of mulch for faster decomposition
- Two sizes to choose from: 72 & 90 inch (2.13 & 2.28 m)
- Mowers work with as low as 14 hp (10 kw) – Note: 25 hp (19 kw) is recommended for tall weeds and intermittent brush
- Cuts brush, weeds or grass with same knives
- Skid-steer mounted models also available
Specifications
Model | 72M |
Power Required (hp) | 25 - 70 |
Width of Cut in Inches | 72 |
Overall Width in Inches | 84 |
Number of Knives | 96 (48 sets) |
Weight in Pounds | 850 |
Warning: Due to the possible danger of flying debris, impact-resistant shielding MUST be provided for the operator. The owner is responsible for providing operator-protection devices on the power unit.