Search Inventory    Search Products & Site

Loftness 60BA

Double tap to zoom



Dual Recutter Bars
The Bad Ax uses recutter bars along with stationary counter teeth to hold material in place while it is being mulched. This unique design allows the Bad Ax to cut material into finer particles for faster decomposition and produce a nicer looking end product. It also helps avoid log jams in the chamber, which can be extremely difficult to remove in competitive units.

60-Inch Diameter, Fully Machined Disc
The Bad Ax can cut down trees up to 14 inches in diameter using a 60-inch diameter disc. The fully machined disc is 1.25 inches thick using premium-strength steel, and it contains no welds, so there are no points subject to stress cracking. Additionally, the bolt-on mounts can be replaced in the field without the need for cutting, welding or rebalancing the rotor.

The large Bad Ax disc builds up its own inertia during use, pushing its productive force beyond the maximum hydraulic horsepower. This helps it more quickly gather and process vegetation.

Direct Drive
The hydraulic motor is directly mounted to the disc, providing 100 percent of its power to the job at hand, and eliminating the need for high-maintenance pulleys or belts. The Wrapflex® polyurethane coupler requires no lubrication and offers excellent vibration dampening, which helps isolate and protect the motor from the forces of the cutting disc.

Bolt-On Teeth
Quadco teeth are attached to the mulching disc using bolt-on mounts. These make the teeth easy to rotate, replace and remove while on the jobsite. The teeth have four cutting surfaces, allowing them to be rotated four times before sharpening is needed.

Quadco Blades
Reversible with ultra-sharp, heat-treated steel knife edges, the Quadco blades effortlessly slice through trees and vegetation, as opposed to shredding and tearing. They can be rotated on site for a fresh cutting edge, or sharpened to maintain efficiency.

The discharge deflector directs material down and away from the machine, helping to protect the equipment and operator. Unlike competitive hinged designs, the Bad Ax uses a rigid deflector and angled recutter bar for better control of the discharge.

Housing Design
The sides of the Bad Ax housing are parallel. This design provides optimal control when compared with funnel, or V-shaped, disc mulchers, which can be easily misdirected when hooking onto stumps or other solid objects.

A custom bearing housing protects large, 80mm roller bearings, which offer a high load capacity. The entire body and disc are constructed of premium high-strength steel for maximum durability

Universal Skid-Steer Mount
The disc mulcher easily pairs with a wide variety of skid steer brands and models.


Model 60BA
Cutting Width 60" (1.52 m)
Overall Width 67" (1.70 m)
Number of Teeth 44
Weight 2,980 LBS (1,351.7 kg)
Crated Weight 3,300 LBS (1,497 kg)
Auxiliary Hydraulic Flow (Up To 5,000 PSI) 30-45 GPM
Hydraulic Horsepower Range 70-120
Piston Motor Max Hydraulic Pressure 5,000 PSI
Disc Speed 1,150 RPM/200+ MPH (321.9 kph) Tip Speed
Hydraulic Horsepower Range 70-120 Hydraulic HP