|All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
|Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
|7 Year gearbox warranty
|Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
|Rugged heavy built gearboxes
|Capable of handling heavy cutting applications.
|Gearbox seal protection
|Gearbox bottom seal protection for longer bearing life.
|2 3/8" Output gearbox shaft
|Large output shaft handles shock loads better.
|2 Piece shield on wing gearbox
|Driveline grease zerks are easier to access.
|LED signal lights
|LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
|LP Performance Hitch
|Reduces drawbar wear by keeping hitch level while going through ditches.
|Low hitch weight on tractor drawbar
|Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
|Narrow A-frame hitch
|Allows for a tighter turning radius.
|Adjustable park jack angle
|Park jack can be adjusted to be perpendicular to the ground.
|Adjustable driveline hanger
|Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
|Input driveline: Cat. 6 CV
|Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
|Drivelines with slip-clutches:
Cat. 5 intermediate
Cat. 4 Wing
|Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
|Grease zerks on end caps of
driveline cross journals
|Intermediate and wing driveline cross journals are easier to grease.
|High Blade tip speed
|Allows clean cutting of material.
|6" Blade overlap
|Eliminates skipping during turns.
|Good cutting capacity
|Can cut brushy areas with saplings up to 3 1/2".
|12" Deck height
|Handles heavy cutting, which reduces balling-up of cut material under the deck.
|3/16" Round stump jumper
|Standard thick stump jumper material keeps damage to a minimum.
|Smooth Top Design
|Allows for easy cleaning of deck.
|Deck sheet tops are 100% welded
|Makes center deck and wing deck stronger.
|1/4" Sidewall thickness
|Increased thickness reduces damage from objects being thrown into deck sidewalls.
|Beveled skid shoe on wing
|Reduces gouging the ground when turning.
|Hinged wing section
|Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
|1" Solid hinge rods
|Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
|Wing transport lock
|Transport lock will hold the wing in the folded position in the event of hydraulic loss.
|Enclosed dual leveling rods
|Cutter pulls equally on the rear axle while traveling over rough terrain.
|5-Bolt hubs on trailing arms
|5-Bolt hubs makes the wheel assembly more durable and longer lasting.
|Drain holes in wheel rims
|Allows water to drain from wheel(s) mounted on folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
|Spring-cushioned trailing arms
|Provides independent suspension, cushions loads on cutter and tractor drawbar.
|Replaceable wheel spindles
|Wheel spindles can be replaced when damaged without replacing entire axle assembly.
|7/8" Leveling rods
|Large diameter leveling rods provide superior supporting strength over rough terrain.
|Laminated tires: Eliminates flats.
Air filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can’t go flat.
|LP Performance Hitch option
|Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
|Bar-tite hitch option
|Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
|Deck ring option
|Keeps blades from damaging the deck.