|Surpassed rugged industry standards
|All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
|Saves customer set-up time and money. Adjustments should always be made by dealer.
|7 Year gearbox warranty
|Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
|Rugged heavy built gearboxes
|Capable of handling heavy cutting applications.
|Gearbox seal protection
|Gearbox bottom seal protection for longer bearing life.
|2 Piece shield on wing gearboxes
|Driveline grease zerks are easier to access.
|LP Performance self-leveling hitch
|Reduces drawbar wear by keeping hitch level while going through ditches.
|Low hitch weight on tractor tongue
|Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
|Narrow A-frame hitch
|Allows for a tighter turning radius.
|Adjustable park jack angle
|Park jack can be adjusted to be perpendicular to the ground.
|Adjustable driveline hanger
|Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to power take-off shaft.
|Input driveline: Cat. 6 CV
|Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
|2 3/8" Output gearbox shaft
|Large output shaft handles shock loads better.
|Input driveline: Cat. 6 CV or Cat. 5 Conventional
|Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline
|Drivelines with slip-clutches:
Cat. 5 intermediate
Cat. 4 Wings
|Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
|Grease zerks on end caps of
driveline cross journals
|Intermediate and wing driveline cross journals are easier to grease.
|High blade tip speed
|Allows clean cutting of material & even distribution. See Specifications for actual FPM.
|6" Blade overlap
|Eliminates skipping during turns.
|Left wing rotates clockwise
|Better discharge of material. Picks up tractor tracks.
|3/16" Round stump jumper
|Standard thick stump jumper material keeps damage to a minimum.
|Smooth Top Design
|Allows for easy cleaning of deck.
|Deck sheet tops are 100% welded
|Makes center decks and wing decks stronger.
|1/4" Sidewall thickness
|Increased thickness reduces damage from objects being thrown into deck sidewalls.
|Beveled skid shoes on wings
|Reduces gouging the ground when turning.
|Hinged wing section
|Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
|1" Solid hinge rod
|Larger diameter hinge gives greater strength to cutter and hinge area.
|Wing transport lock
|Holds transport wing in the folded-up position in case of hydraulic pressure loss.
|Enclosed front to rear dual leveling rods
|Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
|5-Bolt hubs makes the wheel assembly more durable and longer lasting
|Drain holes in wheel rims
|Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
|Spring-cushioned center axle
|Protects unit from bumps and ground shock, cushions loads on drawbar.
|Replaceable wheel spindles
|Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
|Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting & can’t go flat.
|LP performance hitch option
|Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
|Bar-tite hitch option
|Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
|Roadway light kit option
|Allows operator to transport on public roads safer.
|Deck rings (optional)
|Keeps blades from damaging the deck.